Food Engineering
Fatemeh Yousefzadeh; Masoud Taghizadeh
Abstract
Introduction
The consumption of milk and its products is considered as a main indicators of development of human societies. In order to promote the health of children and provide the sufficient amount of calcium and nutrients and make the consumption of these products attractive. Necessary measures ...
Read More
Introduction
The consumption of milk and its products is considered as a main indicators of development of human societies. In order to promote the health of children and provide the sufficient amount of calcium and nutrients and make the consumption of these products attractive. Necessary measures should be taken to increase milk consumption in society and increase the diversity of these products (Keshtkaran et al., 2013). Gelatin as one of the gelling agents used in dairy desserts is a hydrocolloid with unique functional properties and has been used in various industries for a long time (Karim & Bhat, 2008). Gelatin is extracted from the partial hydrolysis of skin collagen, white connective tissue, and animal bones. One of the problems with using gelatin in dairy desserts is the instability at ambient temperature. Therefore, it is necessary to evaluate the characteristics of other native hydrocolloids as an alternative. Tragacanth is a dried gum secreted from several plant species and Iran is the largest exporter in the world. Structurally, the material is regular, odorless and hard. It can be used in various food products. The simultaneous utilization of hydrocolloid mixtures is used to create a synergistic property and to improve these products. Starch originated from a variety of sources , including corn, rice, wheat, potatoes, cassava, bananas, and sorghum (Murphy, 2000) is used in the food industry. Among the sources of starch production, wheat is cultivated in large quantities in Iran.
Materials and Methods
In this study, pasteurized milk was purchased from Salamat Dairy Products Company, gelatin made in Pakistan, tragacanth gum and Gonabad wheat starch were purchased from Kian Shimi Company and sugar and vanilla were purchased from confectionery stores located in Mashhad. Ingredients for dessert production include 80% milk, 10% sugar, 0.1% vanilla, tragacanth gum at concentrations of 1.3%, 1%, and 0.7% and starch at concentrations of 3% , 2%, and 1% by weight (powder selection) according to the method of Tarrega et al. 2004 with a slight modification. A sample containing 1.5% gelatin was considered as a control sample. The mixture was heated to 90 ° C for 20 minutes, stirring at medium speed. The samples were then placed in special containers and cooled to ambient temperature. Prior to testing, the samples were refrigerated (4-5 ° C) for 24 hours. The samples were coded based on the concentration of gum and starch (: T% of tragacanth gum and: S% of wheat starch).
Results and Discussion
The flow behavior in all dairy dessert samples was similar to the control and was pseudoplastic type. The Power model was selected as the best model (R <98, RMSE> 1.6). As the concentrations of tragacanth gum and wheat starch increased, the parameters of hardness, consistency, adhesion and adhesion strength increased significantly, and the samples 0.7T2S, 0.7T3S and 1T, 1S had the same value in terms of all textural parameters. At constant concentration of starch, with increasing tragacanth gum from 0.7% to 1.3%, the rate of syneresis of samples decreased from 0.34% to 0.06% and at constant concentration of gum, with increasing concentration of wheat starch, Syneresis decreased significantly from 0.34 to 0.24%. Increasing the shelf life of the samples naturally led to an increase in syneresis. In the samples 0.7T3S, 1T3S, 1T2S, and 1.3T3S, the increase of syneresis occurred to a lesser extent.. According to the results of analysis of variance, the effect of gum on zeta potential was very significant (p <0.05). Increasing the concentration of hydrocolloids in most samples led to an increase in the amount of negative charge and zeta potential. In most samples, at a constant concentration of tragacanth gum, with increasing the concentration of wheat starch from 1% to 3%, the span decreased, while at a constant concentration of starch, the increase in tragacanth gum from 0.7% 0 to 1.3% led to increase the span. Among the dairy dessert samples, 5 dairy dessert samples include: 0.7T2S, 0.7T3S, 0.7T1S, 1T2S and 1.3T1S, were selected the best in terms of physical and rheological characteristics to the control sample. They were more similar, selected and used for sensory evaluation. The results of comparing the mean of the data showed that different concentrations of tragacanth gum and wheat starch had a significant effect on the sensory characteristics of the samples including: color, flavor, sweetness, adhesion, gum state and overall acceptance (P> 0.05) and increasing the concentration of tragacanth gum and wheat starch had no significant effect on other sensory properties (p> 0.05).
Conclusion
In general, due to the similarities of the physical, rheological and sensory properties of the treatment samples with the control, 1S1T sample was selected as the most suitable sample to replace the sample containing gelatin.
Food Engineering
Mahsa Kamali Sarvestani; Mohebbat Mohebbi; Masoud Taghizadeh
Abstract
Introduction: Celery is one of the most consumed and highly nutritious vegetables with high dietary fiber, phytochemicals, vitamins, and minerals, which offers great benefits for utilization as a functional food ingredient. Fruit and vegetable juice powders have many benefits and economic advantages ...
Read More
Introduction: Celery is one of the most consumed and highly nutritious vegetables with high dietary fiber, phytochemicals, vitamins, and minerals, which offers great benefits for utilization as a functional food ingredient. Fruit and vegetable juice powders have many benefits and economic advantages over their liquid precursors such as reduced volume/weight, reduced packaging, easier handling/ transportation, and much longer shelf-life. Also, powders can be reconstituted to produce juice and used for preparation of products such as snacks, chutney, soups, baby foods, etc. In foam-mat drying, food liquids and pastes are first whipped into stable foam by the addition of different foaming agents or stabilizing agents and then dried in the form of thin layer. This foam structure dries rapidly due to the increase of the surface area of the material by incorporating air/gas and forms a porous structure which gives high quality and instant properties of the dried product. The dried product is scraped off from the drying surface in the form of flakes, which is then converted to a fine powder. Response surface methodology (RSM) is a combination of mathematical and statistical techniques used to investigate the interaction effects of independent variables on responses. There is considerable information on foam-mat dried food powders, but there is no scientific literature related to foam-mat drying of celery juice. The present research was thus focused on optimizing the foaming conditions (WPC as a foaming agent, Xanthan gum (XG) concentration as the stabilizer and whipping time (WT)) to minimize foam density (FD) and drainage volume (DV) using RSM. The effects of drying temperatures on some physicochemical properties of powder were also investigated. Materials and methods: Celery was purchased from the local market.XG and WPC powders were purchased from Sigma Chemical Company (St. Louis, MO) and Milei Company Germany, respectively. Celery juice was extracted by using a juicer machine (Robert Bosch Stand mixer MMB 2000 /05 FD 8611 Type CNSM03EV, 600W, Slovenia). Based on preliminary tests, XG solutions were prepared by dissolving the appropriate amount of the defined gum powder in distilled water and stirring with a magnetic stirrer to achieve a uniform solution. This solution was refrigerated at 4°C overnight to complete hydration. RSM was used to estimate the main effects of the process variables on FD and DV in celery juice foam. The experiment was established based on a face-centred central composite design (FCCD). According to the experimental design, to prepare 100 g of samples, the appropriate amount of celery juice, WPC, and XG solution were poured to a 250 mL beaker. Then the mixture was placed into a water bath for 5 minutes at 55 °C temperature. The mixture was then taken out of water bath and was whipped by a mixer (Gosonic, model No. GHM- 818, 250W, China) with the maximum speed of 5400 rpm at ambient temperature during the given time. The density of foamed celery juice was determined in terms of mass over volume and expressed in g/cm3. To assess foam stability, the drainage test was performed for 1h. Furthermore, the effects of drying temperatures on some physicochemical properties of powders were investigated. Results and discussions: The quadratic model was selected as a suitable statistical model for both FD and DV. ANOVA showed that this model is significant for both responses. Moreover, lack-of-fit was not significant for response surface models at a 95% confidence level, indicating that this model is adequately accurate for predicting responses. Based on the constrain criteria, the optimized foaming parameters were: XG concentration of 0.42% (w/w), WPC concentration of 6% (w/w), and WT of 9.30 min. The amount of FD and FDV for foam at these optimum conditions were 0.4 g/cm3 and 0 ml, respectively. The results showed the moisture content and water activity of the celery powders decreased with the increase in drying temperature. By increasing drying temperature from 40 to 70 °C, bulk density also decreased. Increase in drying temperature results in decrease in moisture content and bulk density. Tapped density generally behaves similar to bulk density because by shaking powder, the space between the particles is filled and occupied volume by the powder is reduced. By increasing in temperature, particle density decreased. Overall, with increasing drying temperature, the porosity of powder increased. Increasing temperature and reducing moisture content, the possibility of approaching and join together of particles is increased and the space between the particles becomes less. The numerical value of the car index parameter in this study was 15.3% to 24.67%. The highest value of flowability related to the sample was dried at 70°c. With decreasing in drying temperature, the moisture content of powders increased and due to forming liquid bridges between particles making them less flowable. The numerical value of the Hausner parameter in this study was 1.15 to 1.32. Except for powder produced at 70 °C, the powder was placed in the intermediate cohesiveness powder class. By increasing drying temperature, the cohesiveness of powder decreased significantly.
Masoud Taghizadeh; Hesam Akhoondzadeh; Zahra Zamani
Abstract
Introduction: Grains are important food sources for human diet because of high protein content. There are different kinds of grains used as food worldwide. Today herbal proteins play an important role as food sources in societies. Herbal protein sources are actually strategic points for improving national ...
Read More
Introduction: Grains are important food sources for human diet because of high protein content. There are different kinds of grains used as food worldwide. Today herbal proteins play an important role as food sources in societies. Herbal protein sources are actually strategic points for improving national dietary all over the world. (Mashayekh et al, 2008). Food experts are becoming more open to Quinoa, because of high protein content, (Dallagnol et al., 2013). FAO compares Quinoa grain with concentered milk powder considering high nutritional facts, and called grains as multi vitamin (FAO, quinoa, 2011). According to scientific reports quinoa grain can be replaced with rice in national dietary (Ferreira et al, 2015. Oelk et al., 1992). Quinoa originally cultivated in South America (barazil, Chile, Peru etc.) and known as semi-cereals (Schoenlechner&Berghofe2010).Furthermore, Quinoa flour is a highly nutritional alternative to feed animals as well as in the production of foods which are suitable for patients with celiac disease and gluten-sensitive patient worldwide. (Dallagnol et al, 2013). From the technological point of view, functional properties hold an important position, Water and oil absorption capacity, protein solubility, gelatinization capacity, foam ability and foam stability are the most important functional properties. (Kaur and Singh, 2007. Ameri shahrabi, 1390). Functional properties are affected by different parameters such as protein network structure, lipid, carbohydrate, temperature and pH, respectively. (Alukoand Yada, 1995). This study proposed to investigate the physicochemical properties of Quinoa flour of three different varieties and monitor the effect of pH on their functional characteristics Materials and methods: three different variety of Quinoa grain, originated and cultivated in Peru, were used for experiments, varieties were black (BLACK COLLANA), white (SALCEDO INIA) and red (PASANKALLA), respectively. Grains were grind by 75 degree in mesh and refrigerated during storage. Carbohydrate, fat, ash, moisture content and protein were measured by AACC, (2003) methods. Functional properties were also measured using scientific methods, Owusu-Apenten, (2002), Kaur and Singh (2007) and customized Adebowale et al, (2005) method which used to measure protein solubility, Water and oil absorption capacity, foam ability and foam stability, respectively. Emulsion capacity and emulsion stability were measured using majzoobi et al, (2012) method. Results and discussion: chemical properties are important in both technological and nutritional aspects, chemical characteristics were observed and reported for three studied varieties. Protein solubility known as the first criteria in protein functional properties (Asadpour et al., 2010), this parameter is influenced by pH and the least value were observed in pH=4.5 (protein isoelectric point). Water and oil absorption capacity is one of the most important characteristics in flours (Kinsella, 1979), this parameter is a physical phenomenon which is known as oil or water confined in non-polar protein chains that is dependent on protein spatial shape. (Kinsella, 1979؛ Kaur and Singh, 2007؛ Trayunham et al., 2007) responses led to 1.285, 1.475 and 1.295 for white, red and black varieties, respectively. Foam ability and foamstability, actually known as volume increase caused by fast stirring and usually results in convenient rheological properties in products texture like ice cream and bread.this parameter refers to the ability of protein to make stable foam aginst mechanical and Gravitational stresses and measured in a 90 min. period of time (Oladela & Aina,2007) (Kinsella,1979). Least responses in this case were observed in pH=4.5 which is an isoelectric range of pH for protein chains. Results were corresponded by responses of El Nasri and El Tinay (2007), Lawal) 2004(, Taghizadeh et al, (2017) and Asadpour et al (2010) about other semi-cereal grains. Last metered parameter was emulsifying ability and emulsion stability, emulsifying in protein structure is an equilibrium between hydrophilic and hydrophobic parts of protein and affected by alkaline range of pH (Ragab et al., 2003( this parameter is influenced by protein solubility which is in the least measures in isoelectric point (Feizi et al., 2013). Results had shown that foam stability would decrease during time passes. This may be due to the coupling of dispersed phase particles (oil droplets) over time. Concerning the effect of pH on emulsion stability, the results showed that the stability values at alkaline pH were higher than that of acidic pH, so that this stability at pH = 9 was significantly different from other pHs. Among the three varieties of quinoa, the amount of protein in the black variety (16.81%) was higher than the other varieties, which could be further investigated as a potential protein source. In addition, results indicate functional properties are influenced by pH, which means out of iso electric point, protein solubility increase and other fictional properties were improve followed.
Masoud Taghizadeh; Asma Eghbal
Abstract
Introduction: One of the methods for increasing shelf life of food is the use of edible coatings, since films and coatings have an important role in the enhance of shelf life and food product’s marketing. Various edible films are nowadays used for food packaging. Using of these biodegradable compounds ...
Read More
Introduction: One of the methods for increasing shelf life of food is the use of edible coatings, since films and coatings have an important role in the enhance of shelf life and food product’s marketing. Various edible films are nowadays used for food packaging. Using of these biodegradable compounds is a new method of replacing polymeric materials and of increasing shelf life of food. Film and coating can control the diffusion of water, oxygen and carbon dioxide. Edible coatings also have the ability to enhance color, acid, sugar and taste during storage. Starch as a natural polymer be a lot in the nature and has a low cost and due to its structure containing amylose and amylopectin it is a suitable option for its use as film and edible coating because starch is barrier for oxygen, semi-permeable to CO2, and has good mechanical properties, therefore suitable for packaging films and edible coatings. However, due to the hydrophilic properties of starch, the starch based films are permeable to moisture and water vapor. One of the ways to reduce water vapor permeability for films and edible coatings is to use hydrophobic compounds such as oleic acid that formed in two layers. There is starch in the lower part of layer. Hydrophobic compound place in the upper layer and it is the barrier for water vapor. The main purpose of this research was to produce edible films based on starch and oleic acid and to investigate their characteristics (thickness, solubility, water vapor permeability, and tensile strength). One of the suitable treatments was then selected and tested at three concentrations as a film coating for greengage, and cases of pH drop and loss of weight, color, and hardness of the samples were recorded for four weeks. Material and methods: First, the film of starch and oleic acid were prepared and then the edible film characteristics such as thickness, solubility, water vapor permeability and tensile strength were measured. After evaluating the film parameters, the optimal amount of oleic acid was selected, then the starch and oleic acid solution of 8, 10, 12 g / l were prepared based on film formulation including starch, glycerol, oleic acid and tween 80. Then the characteristics of Greengage such as weight loss, pH, color and rigidity were measured. Result & discussion: The addition of oleic acid resulted increases in thickness of the edible films because of the increase in the material during solvent drying and variation in the relative humidity of the environment during drying of the material.Solubility: By increasing the amount of oleic acid, the amount of solubility decreased, which could be due to the change in the polarity of the film compounds, which increases the hydrophobicity of the film by increasing the oleic acid that is non-polar, and keep the polar parts away from water. Oleic acid, due to good hydrophilic properties, significantly reduces the vapor flow rate. According to the results, the lowest water vapor permeability is for 10% of oleic acid in the film. According to the results, the amount of tensile strength decreased with increasing oleic acid content. On the other hand, elongation has increased with the increase of oleic acid, and this again decreased in the film with 15% oleic acid. Oleic acid is a short-chain fatty acid, so it can be located between the amylose and amylopectin strands as a plasticizer and because of this, the amount of hydrogen cross link in the film has decreased and its resistance has decreased. Subsequently tensile stress of film increased due to the good and proper distribution of oleic acid in the film. But at the level of 15%, this amount of oleic acid was high, increasing the gap between the amylose and amylopectin strands, followed by weakened films, and both the tensile strength and long elongation were reduced. Regarding the parameters obtained in the film production (mechanical strength and transparency and water vapor permeability) the film formulation with 10% oleic acid was selected and the solutions with total solid of 8%, 10% and 12% for Greengage coating are selected. It is observed that weight loss for coated samples is less than the control sample. These results confirm the starch barrier against the passage of oxygen and carbon dioxide. In all treatments pH has increased over time. The increase in pH in the control sample is than the coated samples because of different respiration rates. Coated sample is a suitable gass barrier followed by reduce the amount of respiration rate, resulting in a slower rate of pH change. In the third and fourth weeks, changes were significant, and in the control samples, the amount of light was higher and the green’s index in them decreased. Color changes in fruits can take place due to loss of moisture and chemical and enzymes reactions. Proteolytic enzymes such as polyphenol oxidase can destroy phenolic compounds that affect color. According to the results, the highest weight loss and moisture loss associated with the control sample showed the highest rigidity over time, which significantly reduced these changes with coating the sample. It seems that the concentration of 10 and 12% of oxidized starch and oleic acid emulsion can be used for proper coating with the least loss of weight and color. Due to the fact that the oxidized starch is very transparent and has a low viscosity, its appearance is not negatively affected and can be used in food coatings.
Ali Shahdadi Sardoo; Nasser Sedaghat; Masoud Taghizadeh; Elnaz Milani
Abstract
Introduction: In Iran, the main problem in greenhouse cucumber production and post-harvest shelf life is short due to the application of traditional packaging and storage methods. This research was carried out in order to investigate on the effects of packaging type and chitosan edible coating on the ...
Read More
Introduction: In Iran, the main problem in greenhouse cucumber production and post-harvest shelf life is short due to the application of traditional packaging and storage methods. This research was carried out in order to investigate on the effects of packaging type and chitosan edible coating on the physicochemical and sensory characteristics of Royal Greenhouse cucumber during storage conditions, in order to prevent of Royal greenhouse cucumber postharvest losses.
Materials and methods: Royal greenhouse cucumbers placed inside the three-layer plastic bags of PE/PA/PE and the effect of different chitosan coating (0, 0.5 & 1 %), concentration of oxygen (3,12 & 21%), storage temperatures (5, 15 & 25 ˚C) and storage time (3, 12 & 21 days) on cucumber quality and shelf life was studied. The quality of cucumber samples was evaluated by weight loss, firmness retention, surface color development (L*, a*, b*), shrinkage and sensory evaluation (taste and freshness).
Results and discussion: The obtained results showed that firmness and organoleptic properties decreased with increasing temperature and time storage, while weight loss and shrinkage was increased, that Leading to loss of cucumber samples quality during storage. Increasing of chitosan coating to 0.5% also showed a beneficial effect on physicochemical and sensory characteristics of the samples during the storage time compared to the control fruit, but by increasing it to 1%, decreased the quality of the final product. The results showed that using modified atmosphere packaging and storage at low temperatures can be in addition to the slow breathing fresh cucumbers from softening and prevent moisture loss the maintenance of cucumber. MAP packaging leads to keeping cucumber green and quality properties compared to the control samples. The optimum condition was obtained at chitosan coating 0.5 %, O2concentration 8.5 %, storage temperatures 9˚C and storage time of 14 days. At this optimum point maximum of firmness, L*, taste, freshness and minimum of shrinkage, weight loss and a* were found to be 10.4 (N), 48.9, 4.35, 4.5, 6.25 %, 2.75 % and -37.28 respectively.
Masoud Taghizadeh; Behdad Shokrollahi; Fatemeh Hamedi
Abstract
Due to the need to find new protein sources with considering the fact that the bitter vetch seed has high levels of protein content, physicochemical and mechanical properties of bitter vetch seed and functional properties of its flour were evaluated in this study. The effects of altering the pH on protein ...
Read More
Due to the need to find new protein sources with considering the fact that the bitter vetch seed has high levels of protein content, physicochemical and mechanical properties of bitter vetch seed and functional properties of its flour were evaluated in this study. The effects of altering the pH on protein solubility, foaming capacity, foaming stability, emulsion capacity and emulsion stability were studied. The average length, width and height of the grains were 3.5638 mm, 3.6197 mm and 3.8365 mm. the arithmetic and the geometric mean diameter, sphericity and the area were 3.6733mm, 3.6701mm, 1. 0318 and 42.405mm2 respectively. The average true density, bulk density and porosity were 1326.6 kg/m3, 0.7962 kg/m3 and 40.2753% respectively. also the average coefficients of static friction of the plywood, glass, rubber, fiberglass and galvanized iron surface layer were 0.4348, 0.1943, 0.4244, 0.3249 and 0.3739 respectively. Flour produced from this seed contains 24% protein and 9% fat. water and oil absorbing capacity were obtained 2.01 ±0.01 and 1.77±0.03 respectively (grams of water or oil per grams of sample). The results also showed that changes in pH, affected the solubility, foaming capacity, foaming stability, emulsion capacity and emulsion stability of bitter vetch flour.
Fatemeh Heidari Dalfard; Masoud Taghizadeh; Seyed Mohammad Ali Razavi
Abstract
Introduction: Malt extract is one of the malt products obtainedfrom concentrations of water soluble extract of grains such as barley and is a proper alternative to white sugar. It has a high diastasis properties andcontainshigh amount of different vitamins specially the group of vitamin B as well as ...
Read More
Introduction: Malt extract is one of the malt products obtainedfrom concentrations of water soluble extract of grains such as barley and is a proper alternative to white sugar. It has a high diastasis properties andcontainshigh amount of different vitamins specially the group of vitamin B as well as high amount of fermentable sugars. Therefore, malt extract has high nutritional value and is recommended by nutritionist for children and people who are having growth problems. In addition, it has a high potential to be used as sweetening agent in different food products such as cookies, biscuits, ice cream, chocolates etc. Knowledge on the thermo-physical properties of malt extract such as density, specific heat, thermal conductivity as well as thermal diffusivity is highly necessary for the designing of processing equipments, formulation of derived products, heating and chilling processes, and other unit operations such as pasteurization, concentration, dehydration as well as final safety and quality of formulated products. Since, no research work has been reported on thermo-physical properties of malt extract, the aim of this study was to determine different thermal properties of malt extract as well as investigation of the effect of temperature and soluble solid contents (SSC) of the studied properties.Materials and methods: Barley malt was purchased from local market. 150 gr of malt was first grounded and added to 600ml water at 46°C and stored for 30 minutes. Then, its temperature was increased using a heater to reach 70°C. 300 ml water was then added to the mixture and stored at 70°C for 60 minutes. Then, the mixture was cooled at room temperature and filtered to gain a sweet solution. The obtained solution was concentrated to 60, 70 and 80 degree of Brix for further experiments.Specific heat and thermal conductivity of samples were determined using a differential scanning calorimeter (DSC). DSC is a powerful tool which is able to spontaneously measure different thermal propertiesof samples such as specific heat, thermal conductivity, glass transition temperature, melting point, crystallization point etc. as a function of time and temperature at the desired temperature levels. Density of samples was also measured using a 50ccvolumetric pycnometer. 25 grams of samples were first solved in hot water and then were placed in an isothermal bath to measure the density. Thermal diffusivity of samples was determined using the following equation:∝=k/〖pC〗_p Results and discussion: The obtained results on specific heat measurement showed that decreasing SSC from 80 to 60% and increasing the temperature from 25 to 90°C would increase cp from 2.074 to 3.063 kJ/kg°C in a linear manner. Following equations were obtained to predict specific heat as a function of temperature:C_p=2.756+0.004T R^2=0.893 ، X_s=60C_p =2.245 +0.005T 〖 R〗^2=0.868، X_s=70C_p=2.066 +0.001T R^2=0.75، X_s =80Thermal conductivity measurements were also showed that decreasing SSC from 80 to 60% and increasing temperature from 25 to 90°C would increase the K values from 0.1196 to 0.347 W/m°C in a linear manner. Increasing temperature would increase molecular movements and therefore it elevates the heat transfer velocity and K increases. Following equations were obtained to predict thermal conductivity as a function of temperature:K=0.152 +0.003T R^2=0.761، X_s=60K =0.097+0.002T R^2=0.851، X_s=70K=0.114+0.001T R^2=0.706،X_s =80In order to develop a model to predict thermal conductivity of malt extract based on its soluble solid content and temperature, multiple regressions was used. The obtained model was a two-parameter linear model with R2 of 0.858. The results showed that 1% increase in soluble solid content percentage would cause an increase of 6% in K, while 1% increase in temperature would cause only 49% increase in thermal conductivity value.Density measurements were also showed that increasing density from 60 to 80% and temperature from 25 to 90°C would increase density of malt extract. Following equations were obtained to predict density as a function of temperature:P=1328.699-0.402T R^2=0.999، X_s=60 P=1375.451-0.290T R^2=0.999، X_s=70 P=1426.201-0.286T R^2=0.998،X_s =80Thermal diffusivity of samples was also determined using indirect method for soluble solid content of 60 to 80 and in the temperature range of 25 to 90°C. It was found that thermal diffusivity would increase linearly by decreasing soluble solid content and increasing temperature. Following equations were obtained to predict thermal diffusivity as a function of temperature:∝=5.176〖×10〗^(-8)+0.049×〖10〗^(-8) T R^2=0.783، X_s=60∝=2.993×〖10〗^(-8)+0.050×〖10〗^(-8) T R^2=0.929، X_s=70∝=3.125×〖10〗^(-8)+0.036×〖10〗^(-8) T R^2=0.94،X_s =80The results of the present work were in agreement with the results reported by other researchers confirming that both SSC and temperature have significant effect on thermo-physical properties of malt extract.
Atefeh Farahmand; Fateme Mousavi Baygi; Masoud Taghizadeh; Amin Ziaforoughi
Abstract
Introduction: One of the most important aspects of food preservation is controlling the moisture of material such as fruits.Dryingis considered as important method to controlbacteriasafely using reduction of moisture. The hot air drying method has been widely adopted in manufacturing of conventional ...
Read More
Introduction: One of the most important aspects of food preservation is controlling the moisture of material such as fruits.Dryingis considered as important method to controlbacteriasafely using reduction of moisture. The hot air drying method has been widely adopted in manufacturing of conventional dried food.Nowadays, Infrared radiation (IR) has significant advantages over conventional drying. Among these advantages,higher drying rates giving significant energy savings anduniform temperature distribution giving a better quality of product. Therefore, it can be used as an energy saving drying method. Earlier attempts forapplying infrared waves to drying of agricultural materials have been reported in the literatures, such as banana, onion, garlic, apple, corn, pomegranate seeds and peach. The persimmon (Diospyros kaki) is native to East Asia, most likely China. This fruit has very short shelf-life; it is due to thehigh soluble tannin content of the fruit during storage even at refrigerated conditions. The persimmon is mainly eaten fresh, but can be dried.Duringdrying the tannin cells coagulate, so astringency is removed and the sugars in the fruit exude to the surface where they crystallize, thus producing a sweet, candied product. The objective of this study was to examine the drying behavior of the far infrared and hot- air drying of persimmon slices by comparing the physical quality. Materials and methods: Persimmon (Diospyros kaki) used in this study was purchased from a local market (KhorasanRazavi, Mashhad). The whole samples were stored at 4°C. The initial moisture content of persimmon was found to be 78.2 kg H2O/kg moisture. The sampleswerecut into 5mm slices using a cutting machine and were dried to 10% final moisture (wet basis). - Infrared dryer setup: Infrared (IR) dryer used in this research was equipped with IR lamp (1300W). Persimmon slices were placed in a single layer on the drying tray and heated from one side. Thermocouples (Type K) were inserted at the center of persimmon slice.IR drying tests were conducted with final product temperatures controlled at 50°C, 60°C and 70°C. -Hot air dryer setup: Persimmon slices were arranged in a single layer on the trays and dried in cabinet dryer at material temperatures of 50°C, 60°C and 70°C.Air velocity in the dryer was 1.5 m/s. -Quality evaluation: Persimmon slice drying characteristics including rehydration ratio, color parameters, shrinkage, texture and sensory properties were investigated ResultsandDiscussion: It is clear that the moisture content and drying rate decrease continuously with drying time. The drying rate was rapid during the initial period but it became very slow at the last stages of dryingprocess. Persimmonslices dried with hot-air and infrared dryer at temperatures 60 and 70◦c respectively, had a maximum rehydration ratio. In general, infrared drying showed significant effect on L value (p
Habib Jahandideh; Masoud Taghizadeh; Mohammad Hossein Hadad Khodaparast; Arash Koocheki
Abstract
Introduction: Nowadays, one of the most important nutritional problems in different societies is the protein mal-nutrition. Since bread is the main food material being consumed in all over the world, bread enrichment using the grains rich in protein such as sesame seeds would be an appropriate alternative. ...
Read More
Introduction: Nowadays, one of the most important nutritional problems in different societies is the protein mal-nutrition. Since bread is the main food material being consumed in all over the world, bread enrichment using the grains rich in protein such as sesame seeds would be an appropriate alternative. However, addition of sesame products such as Tahini meal would cause some technical difficulties such as dough stability, water absorption, dough extension time, etc. in bread manufacturing processes.In this study the effect of addition of xanthan gum to on physical and textural properties of Baguette bread containing tahini meal was investigated.Materials and methods: Wheat flour and tahini meal were supplied from Damghan and Ardakan cities, respectively. They were then refrigerated prior to baking process and different chemical tests were carried out according to standard methods. Protein was measured based on Kejeldahl method. Moisture content as well as ash content were determined using oven method.Raw fat was calculated according to AACC-No. 30-10 and raw fiber was measured using appropriate instrument (Scientific velp-FIWE6 F30530201). Starch determination was carried out using Small universal polarimeter (SUP-Germany). Xanthan gum was purchased from Provisco Ltd. (Switzerland) in food grade quality. Bread yeast (Saccharomyces cerevisiae) was also supplied in dried form. All other chemical enhancers were purchased from Merck Ltd. (Germany). Baguette dough was produced from mixture of wheat and Tahini meal flour based on protein content and the amount of protein in final dough was increased from 10.28% in flour free of tahini meal to 12, 14 and 16% in different treatments. The rest time for all flour samples was fixed at 15 min and the baking process was carried out for 15 min at 300°C. Baked breads were exposed to room temperature for two hours and then were packed using poly-ethylene (PE) film for further tests. Specific volume of bread samples was measured using rapeseed displacement method (AACC, No. 54-30, 2000). Samples porosity was determined using image processing techniques. Samples were cut to 2cm×2cmcubes and an appropriate scanner (Canoscan 8800F, Japan) with 300 pixel resolution was used to acquire the images for further process using Image J(1.6r, 2010). Apparent color for the baguette samples (in terms of CIE ‘L*’- lightness,“a*” - redness and greenness, and “b*”- yellowness and blueness) were also measured using image processing techniques (Image J, 1.6r, 2010).Texture profile analysis (TPA) test was carried out using a texture analyzer (QTS Texture Analyzer, CNS Farnell, Hertfordshire, UK) to study the effect of xanthan gum and tahini meal on parameters such as hardness, gumminess and cohesiveness in all baguette samples.Results and discussion: ANOVA test showed the significant effect of xanthan gum and tahini meal on the porosity of samples. The porosity of samples containing less than 0.5% xanthan gum at all tahini meal levels, was significantly less than control sample.Similar results were obtained in the case of specific volume meaning that the employed treatments have significant effect on bread’s specific volume. Increasing tahini meal from 9.45% to 14.53% caused significant decrease in specific volume. This could be due to the weakness of dough gluten matrix. These results are in agreement with other works reported by other researchers (Paraskevopoulouet al., 2010; Mohammad Idrisset al., 2012; and Guardaet al., 2004). The results obtained for apparent color of bread core also showed the effect of xanthan and tahini meal. The only exception was found in case of a* value when studying the effect of xanthan gum, meaning that xanthan gum has no significant effect of this parameter. In the case of apparent color in bread crust, the studied treatments (xanthan gum and tahini meal) showed significant effect on all color parameters. Different textural properties of baguette samples including hardness, gumminess and cohesiveness were also measured. Conclusion: The results indicated obvious effect of xanthan gum and tahini meal levels on these mentioned parameters. Increasing tahini meal and xanthan gum levels would increase hardness as well as gumminess. However, addition of xanthan gum and tahini meal cause significant decrease in cohesiveness. This could be due to dilution effect of these substances which decrease the concentration of protein matrix existed in flour’s gluten.
Amir Jajarmi; Masoud Taghizadeh
Abstract
Introduction: Lime (Citrus aurantifolia L) is belonged to citrus family and has two varieties on the basis of sweet or sour taste; two well known varieties of sour lime are Persian and Key that are cultivated in the southern of Iran. Based on FAO statistics, Iran produced about 615,000 tons of lime in ...
Read More
Introduction: Lime (Citrus aurantifolia L) is belonged to citrus family and has two varieties on the basis of sweet or sour taste; two well known varieties of sour lime are Persian and Key that are cultivated in the southern of Iran. Based on FAO statistics, Iran produced about 615,000 tons of lime in 2010, and is ranked among 10 lime producersinworld wide. Physical properties of fruits are essential information in designing equipments and processes being used in different manufacturing stages such as harvesting, cleaning, sorting and grading, transporting, packaging, as well as estimating of cooling and heating loads during heat transfer processes. Moreover, physical properties affect products acceptability since consumers usually prefer fruits and vegetables with brighter color, appropriate size and uniform shape. Among physical properties, weight, volume and projected area are important parameters for designing sorting equipment.Materials and methods: In this study, lime samples were selected from Key variety which is cultivated in southern of Iran. From the whole, physical properties of about 300 limes were investigated and regression model were developedto estimate weight and volume on the basis of length, width, thickness and projected area.In order to determine the initial moisture, tenlime samples were randomly selected and taken in to hot air oven at 80C for 24 h. The average values of three replicateswerereported.The major dimensions (Length (L), width (W), thickness (T)) were measured using a micrometer with an accuracy of 0.01 mm.Projected area of limes was calculated in three dimensions using image processing technique. Apparent color for the lime samples was also measured in terms of CIE ‘L*’ (lightness), “a*” (redness and greenness) and “b*” (yellowness and blueness), using image processing techniques. Step wise regression was used to develop multivariate models. In this method, the independent variables would enter the equation successively based upon their degree of dependency. In order to estimate weight and volume of lime samples,three category modelswere developed as follow. 1- Regression models based on length, width and thickness. 2-Regression models for predicting weight of lime based on calculated volume. 3- Regression models based on projected area. When there are a large number of variables in the database, it is very likely that subsets of variables are highly correlated with each other.In this study, principle component analysis (PCA)was applied in order to have an accurate and reliable evaluation from existed correlation between physical properties of lime.Result and discussion: The initialmoisture content of limeswas found to be 84.34%.The averaged values of length, width and thickness of limes were35.84, 32.92 and 32.56, respectively. The static coefficient of friction for limes was determined on fourdifferent surfaces namely plywood, galvanized iron sheet, rubber and glass. The glass and plywood showedmaximum and minimum static coefficient of friction respectively. In addition, the sphericity and aspect ratio of lime were found to be 94.32% and 92.18%, respectively. The obtained sphericityvalues were similar to values reported by Sharifi et al., (2007) for orange variety of Tamson and lower than orange varieties of Navel reported by Topuz et al., (2006). The obtained results showed high correlation between three major dimensions and lime’s weight. The predictive models for lime have lower coefficient in comparison with LorestaniandTabatabaeefar(2006) research report forheterogeneous shape of limes. Among regression models for weight prediction of limes, the best model was obtained on the basis of the third projected area with R2of 0.921. The regression models on the basis of calculated volume showed appropriate performance for prediction of lime’s weight. Among regression models on the basis of dimensions, the single parameter model based on lime’s width found to bethe highest coefficient for prediction of volume. Similar toweight prediction, single parameter model on the basis of the third projected area showed the best performance for volume prediction. Conclusion: The results obtained from principle component analysis confirmed the regression models and showed high correlation between physical properties such as projected area, dimension, weight and volume with each other as well as positive correlation with coefficient of friction on the rubber surface and negative correlation on theglass surface.
Arash Ghaitaranpour; Masoud Taghizadeh; Hamed Mahdavian Mehr; Mohammad Reza Abdollahi Moghaddam
Abstract
Bezhi (or Beji) is a special sweet and fried cookie which is produced traditionally in west region of Iran. In this study, the effect of different temperature levels (150, 165 and 180°C) and frying time (1 to 8 min) on physicochemical properties of Bezhi was investigated. The obtained results showed ...
Read More
Bezhi (or Beji) is a special sweet and fried cookie which is produced traditionally in west region of Iran. In this study, the effect of different temperature levels (150, 165 and 180°C) and frying time (1 to 8 min) on physicochemical properties of Bezhi was investigated. The obtained results showed that increasing frying time up to the first 3 minutes causes a significant increase in sample volume. Although, further increase in frying time was not accompanied by volume increase but the mean volume was decreased significantly. Generally any increase in the studied parameters (temperature and frying time) would increase the samples’ diameter while other dimensional characteristics remained unchanged. Moreover, increasing temperature and frying time would increase the samples’ hardness as well as their color changes (∆E). L* value showed decrease when increasing studied parameters. The rate of decrease in L* in the studied temperature levels (150, 165 and 180 °C) were found to be 0.00987, 0.07665 and 0.11250 S-1 respectively. In addition a* value was increased by increasing the studied parameters while b* remained unchanged. The activation energy for the enzymatic reactions in Bezhi samples was 31.12 Kcal/mole which demonstrates the high effect of temperature on these reactions in the studied temperature range. Temperature and frying time showed considerable effect on the crust formation of samples. While the maximum crust thickness at 150 °C was reached to 0.55 mm, the value of 1.45 mm was recorded as the maximum crust thickness at 165 and 180 °C. So oil temperature and frying time have an important effect on physiochemical properties of Bezhi.
